dealer excellence 2014 Dealer Name

Hyundai HL940

Hyundai HL960

Hyundai HL980

Hyundai HX145LCR

Hyundai HX160L

Hyundai R35-9A

Hyundai R60-9A


Equipment Salesperson
Sales Administrator

Looking for
Used Equipment?


JCB Teleskid

JCB is Simply Irresistible!

JCB's Side Entry Skid Steer...It's Just Common Sense

TM320 TeleLoader Moving Salt

Use Attachments with JCB Telehandlers

Through Sun or Snow, JCB gets it done!

  • Request a Quote
  • Financing
  • Print a Brochure
Standard Features
Request a Quote


Our large platform 2,600 lb. (1,179 kg) rated operating capacity JCB 260T vertical lift compact track loader incorporates our unique single boom and side entry design. Designed for comfort, safety, economy, productivity and durability in the USA (home of tracked loaders), the 260T’s 74 hp (55 kW) JCB EcoMAX engine is durable and hugely efficient.

The 260T has on average 60% better visibility and a 33% larger cab than rival manufacturers’ tracked skid steer loaders, and there are a whole host of other benefits as well. Like ergonomic controls, an extremely tough powerful boom and a low cost of ownership.

All of which helps to make our large platform compact track loaders 21% more productive in performance tests against the competition (based on faster speed of getting in / out and faster startup times).


Model Year
Request a Quote


10,756 lbs. (4,879 kg) operating

Engine & Drivetrain

Engine Make
Net Horsepower
74 hp (55 kW)


Rated Operating Capacity
2,600 lbs. (1,179 kg)

Standard Features

 The JCB 260T compact track loader is designed with safety in mind. Our unique PowerBoom single loader arm design means operators can enter the machine from the left side, avoiding slip and crush hazards and contact with the loader arm and its attachments.  
 It’s also got 60% better visibility than the average tracked skid steer, partly due to a low profile single rear loader tower and the absence of a conventional large rear torque tube.  
 There’s the lowest entry step in the industry, a front windshield that doubles as an emergency exit and a standard rear view mirror. Then there’s the fuel tank, integrated into the chassis for added protection; and the hoses, safely run through the PowerBoom to reduce the possibility of damage.  
 Safety in numbers  
    The USA’s NIOSH (National Institute of Occupational Safety and Health) has rewritten their safety guidance after recognizing the many benefits of JCB’s PowerBoom side entry design.  
    270 degree all-round visibility.  
    JCB PowerBoom has up to 20% more steel in one boom than the twin arms of conventional designs.  
    Our compact track loader’s emergency exit is over twice the size of that found in a conventional design.  
Operator Comfort
 Keeping your operators fresh, focused and productive is paramount, which is why we’ve designed the 260T compact track loader with a 33% larger cab than the nearest competitive machine. Our standard seat has mechanical suspension and there’s also a 12V charger, easily readable control panels and an electronic hand throttle.  
 Servo-assisted controls make handling smooth and intuitive; all in all, we like to think the JCB 260T compact track loader is a comfortable favorite with operators.  
 There’s no more productive tracked skid steer than the JCB 260T. The figures speak for themselves: it has a 16% lower cost of ownership than other tracked loaders, a better SAE service rating, annual fuel savings of over 1,050 gal. (3,975 liters - based on 50 weeks per year and 35 hours per week) and a heavy-duty crowd ram that’s nearly 3 times the size of the nearest major competitor.  
 There’s a standard mechanical quickhitch and auxiliary couplers on the PowerBoom too. In short, it’s as productive as a tracked skid steer gets.  
 Fast entry and exit speeds  
    Side entry makes a JCB compact track loader 17% quicker in applications requiring multiple entries and exits, such as some agricultural tasks.  
 We’ve designed the 260T compact track loader to be serviced easily, ensuring minimum downtime. Firstly, we mount our engines longitudinally for easy access to the drive belt and associated components. There are also 30% fewer grease points than conventional vertical lift twin arm tracked loaders.  
 We’ve installed front and rear chassis clean out plates, with a fluid drain point in the rear one, as well as durable O-ring face seals on all hydraulic fittings. There’s excellent service access through the rear service door and gas strut-assisted tilting cooling pack.  
 So it’s no wonder the JCB 260T large platform compact track loader is on average 24% more serviceable than competitors’ machines, based on SAE Service Audit Scores. And there’s more too.  
 Even more serviceability  
    Easy-to-service hydraulically-driven variable speed fan.  
    Cab can be easily tilted by 1 person for hose access.  
    Daily check points are grouped and easily accessible.  
    Chassis has an integrated fuel tank drain and point.  


 Foot throttle – increase engine speed as needed to help minimize fuel consumption.  
 Cab is sealed and pressurized to prevent dirt and dust ingress.  
 A/C options.  
 Keyless start / JCB immobilizer – allows up to 5 different 4 digit PIN numbers for added security and accountability.  
 Lexan front windshield – impact protection for heavy-duty applications (i.e. applications using forestry cutting heads).  
 Cloth heated air suspension seat – fully adjustable for operator .comfort.  
 2 in. seatbelt fitted as standard.  
 2 in. 3-point seatbelt – recommended for 2-speed.  
 3 in. seatbelt – retractable seatbelt adjusts to fit all operator types.  
 3 in. 3-point seatbelt – recommended for 2-speed.  
 Radio with speakers and aerial – MP3 compatible with auxiliary connector in the control pod storage compartment.  
 Canopy wheeled full door with mesh – replaces half mesh door (for added protection in areas with greater amounts of obstructions).  
 Right hand mesh to replace glass as standard – we suggest you order right hand mesh when ordering full door mesh.  
   Roadlight kit with brakelights – includes larger headlights, indicators, brake lights, mirrors, position lights, and flashers / hazard lights.  
   Grid heater for canopy builds – for use in cold climates (standard in some regions).  
   Engine block heater – uses an electrical heater to heat the engine easing starting in cold climate conditions.  
   Worklights with 2 rear lights for non-A/C machines – adds an additional rear work light to the 1 standard.  
   Smooth Ride System (SRS) – cushions the loader arm, reducing spillage and providing a smoother ride.  
   Parallel lift (raise only) – helps keep loads level throughout the lift cycle; ideal for handling palletized loads with forks.  
   2-speed for wheeled and tracked machines – increases speed when roading for quicker travel times.  
   Auxiliary hydraulic coupler placement – left hand side – allows you to use third party attachments on JCBs without changing hose lengths.  
   Hydraulics are available in both standard flow and optional high flow for increased attachment versatility.  
   Biodegradable oils – environmentally friendly alternative.  
   Auxiliary circuit low flow return – for use with attachments requiring a low flow case drain  
   Hydraulic quickhitch – for easy changeover between attachments, ideal for applications that require multiple attachment changeovers.  
 Further Machine  
   Wide core radiator – for increased cooling ability in applications with high amounts of airborne contaminates.  
   Hardide pivot pins – for severe duty applications.  
   Spark arrestor exhaust – reduces the risk of sparks being emitted from the exhaust; ideal for forestry and waste / recycling applications.  
   Tool kit (basic): grease gun, wheel brace and tommy bar.  
   Tool kit (full): grease gun, wheel brace, tommy bar, tool roll and pressure gauge.  
   Twine cutter – cuts string, twine, and wire around the axle shaft and flange to prevent damage to axle seals.  
 Waste and recycling protection package – level 2 FOPS guard and front windshield guard.  
 Demolition package – fire extinguisher, level 2 FOPS guard, front windshield guard, twine cutter and heavy-duty rear bars.  
 Forestry package – level 2 FOPS guard, front windshield guard and heavy-duty rear bars.  
 Waste and recycling protection package – level 2 FOPS guard and Lexan front windshield.  
 Demolition package – fire extinguisher, level 2 FOPS guard, Lexan front windshield, twine cutter and heavy-duty rear bars.  
 Forestry package – level 2 FOPS guard, Lexan front windshield and heavy-duty rear bars.  
 Enclosed cab additional protection package – level 2 FOPS guard and left and right hand steel mesh to provide protection over laminated cab glass.  

Request a Quote

 US/US TERR.  Canada  Mexico  OTHER INTN'L LOC.
  • *First Name:
  • *Last Name:
  • Business Name:
  • Title:

  • *Address:
  • *City:
  • *State:
  • *ZIP Code:

  • *Phone:
  • Work Phone:
  • *Email:
  • Preferred Color:
  • Purchase Timeframe:

  • Additional Accessories:
  • Comments:
  • Extended Warranty:
    (Subject to Availability)
    Yes No

  • Where did you hear about us?

Have a trade in?

  • Trade in Mfg:
  • Trade in Model:
  • Trade in Year:
  • Trade in Miles/Hours:

  • Trade-In Accessories:

Contacting out of state dealer?

  • Reason for contacting:
  • Delivery Method:
  • Please check here if you would like to receive Email notifications of promotions, sales and special events.
Invalid Captcha. Please check the box.
To help us prevent spam, please check the box below.

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

Need to Rent a Machine?

Click Here for Reliable Rentals
@ Competitive Rates

YES JCB is your
serving Southern Wisconsin
Vermeer 504 PRO Baler
5' Dia x 4' Width
-Variable Chamber
-Xtracut17 Chopper
-Hydroflexcontrol Drop Floor
-E-Link Pro Display
-Endless Belts
-Camless Pickup
100hp Required
Call for Pricing
Vermeer MC3300
Mower Conditioner
-10.5' Cutting Width
-75hp Required
-Hydraulic Nitrogen-Charged
Accumulator Suspension System
-Quick-Change Shear Ring Protection
-Quick-Clip Blade Rentention System
-3-year Cutter Bar Warranty
Available with
Tine or Steel Roller Conditioners
Call for Pricing
Vermeer VR1022
Carted Wheel Rake
-22.6' Max Raking Width
-82" Max Windrow Width
-30hp Required
-Standard Left or Right Side
Capable Single Side Raking
-Rubber Torsion Toolbar Suspension
-Optional Center Splitter
Call for Pricing
Vermeer TE330 Tedder
-33.5' Tedding Width
-8 Rollers
-Hook Tine
-60hp Required
-Ideal for Mid-Size Operations
-Vertical Hydraulic Fold
Call for Pricing
Vermeer BPX9000
Bale Processor
-Handles 2- 6' x 5' Bales
-Up to 50' Horizontal Spread
-5 Setting Cut Control Bar Adjustment
-85hp Required
Call for Pricing
Vermeer SW5000
Silage Wrapper
-5' x 4' Max Bale Size
-2,220lbs Bale Weight Max
-55 or 70% Pre-Stretcher
-41hp Required
Call for Pricing